Emergency Lighting LED Panels are a functional kit for helping the lamps to make shorter lighting time Luxsky lighting focuses on the lighting solutions and products for our clients in many kinds of high quality Specification: LED high lumen output, view-side light; Warm white, natural white, cool white and other colors can be available; Color temperature 2800K-3300K, 4000-4500K,5000-5500K, 6000K-6500K; Input voltage: AC100-240V, constant current; Dimensions: 5'', 6'', 8'', 595*595mm,600*600mm, 620*620mm, 300*1200mm, 600*1200mm; Luminous efficacy >100lm/W; CRI. 80-85Ra; Working temperature:-15ºC~55ºC; Beam angle: 120°; Lifetime: more than 50,000Hours; Install method: suspended/ceiling mounted/recessed; Materials: High lumen and quality Epistar 2835 SMD LEDs(22-26lms), 6063 aluminum housing profiles(silver/white); Adopt own design structure and nice heat sink to keep panel structure steady and high quality; High-efficiency, low-heat and energy-saving, eco-friendly, long lifetime, UV-resistant,dustproof; With TUV CE, RoHs approval,TUV/UL driver, 3 years' warranty; With LED emergency lighting time 1 hour to 3 hours available. Emergency Lighting Driver Introduction: Match with DC12V battery (ni-M H), (ni-C d) , which can be high temperature resistant and can be charged. The device can meet the requirement of 10-100 watts full power LED panel to realize the emergency function; When emergency lighting is started, the brightness can be 30% -50% of the normal lighting. It meets international emergency standard, 30% emergency lighting, three-color indicat or lights. When AC power is working, the inverter makes the battery in the situation of charging or preparing  to work; Once earthquak es, fire disasters or explosions happen, the AC power is off, so the inverter  will start the emergency batteries to offer power to lights. When the battery finishes charging, it will keep the power , compensate the battery' s discharging  and maintain the performance and lifetime of battery. It can meet 1-5 hour s emergency lighting after match the fitful batteries. Environment temperature : -20 to 60ºC . Connect the driver and panel strictly by seeing the connected drawing, do not  advise to take off the cover . Customer could check the inverter 's power stock per iodically. Parameters(take 40W emergency panel as sample): 1>. AC 100-240V input , 50/ 60Hz; 2>. DC20-70V Out put; 3>. For LED power : 10-100W 4>. Em ergency time: 3 hrs ( can be custom if possible) 5>. Batter: Dc12V; 6>. Charge current: 100-200m A; 7>. Charge time: 30-45Hrs by slowing charge way; 8>. Max. Size: 440* 75* 75mm. Emergency Driver Connect Drawing & Attention: Seeing the connect drawing and each part will separately connect to the following lines: 1>. "1" connect AC"L". 2>. "2" connect AC"N" and LED driver's AC "-" ends. 3>. From "1" to connect one wire to wall switcher "S", then connect to "3". LED driver's AC "L" also needs to connect to "3". 4>. "4" connect LED driver's DC"+" of DC output end. 5>. "5"connect Lamp's "-" and LED driver's DC"-" here. 6>. "6"connect lamp's " +" here. After all connections are finished, then turn on the power to test.  Do not allow the emergency driver to be no load, no matter to check the lighting function or test the inverter's charging function, it must connect lamp to work. Main driver wire: AC "L" and "N" must connect to the main wire in the emergency box, switcher is not allowed to install on them. When lamp starts emergency lighting, it will be not controlled by Switcher. Green LED: it shows driver working; Red LED, it shows recharging; Yellow LED: it shows malfunction. In the emergency lighting, except LED lamp, all working sign lamps will be turned off. Maintenance: Emergency ma chine chip is the core component for controlling the battery charging and starting the emergency lighting, so when connect the wires and should keep it connected correctly. After installation and work, it will release the power from battery each three mo nths, which can protect the battery and extend its lifetime . After they are used norma lly, they should be often checked and ma intained by professional workers, once they find they work unusually or need to inspect, please inform luxsky lighting.  Emergency Lighting LED Panels are a functional kit for helping the lamps to make shorter lighting time Luxsky lighting focuses on the lighting solutions and products for our clients in many kinds of high quality Specification: LED high lumen output, view-side light; Warm white, natural white, cool white and other colors can be available; Color temperature 2800K-3300K, 4000-4500K,5000-5500K, 6000K-6500K; Input voltage: AC100-240V, constant current; Dimensions: 5'', 6'', 8'', 595*595mm,600*600mm, 620*620mm, 300*1200mm, 600*1200mm; Luminous efficacy >100lm/W; CRI. 80-85Ra; Working temperature:-15ºC~55ºC; Beam angle: 120°; Lifetime: more than 50,000Hours; Install method: suspended/ceiling mounted/recessed; Materials: High lumen and quality Epistar 2835 SMD LEDs(22-26lms), 6063 aluminum housing profiles(silver/white); Adopt own design structure and nice heat sink to keep panel structure steady and high quality; High-efficiency, low-heat and energy-saving, eco-friendly, long lifetime, UV-resistant,dustproof; With TUV CE, RoHs approval,TUV/UL driver, 3 years' warranty; With LED emergency lighting time 1 hour to 3 hours available. Emergency Lighting Driver Introduction: Match with DC12V battery (ni-M H), (ni-C d) , which can be high temperature resistant and can be charged. The device can meet the requirement of 10-100 watts full power LED panel to realize the emergency function; When emergency lighting is started, the brightness can be 30% -50% of the normal lighting. It meets international emergency standard, 30% emergency lighting, three-color indicat or lights. When AC power is working, the inverter makes the battery in the situation of charging or preparing  to work; Once earthquak es, fire disasters or explosions happen, the AC power is off, so the inverter  will start the emergency batteries to offer power to lights. When the battery finishes charging, it will keep the power , compensate the battery' s discharging  and maintain the performance and lifetime of battery. It can meet 1-5 hour s emergency lighting after match the fitful batteries. Environment temperature : -20 to 60ºC . Connect the driver and panel strictly by seeing the connected drawing, do not  advise to take off the cover . Customer could check the inverter 's power stock per iodically. Parameters(take 40W emergency panel as sample): 1>. AC 100-240V input , 50/ 60Hz; 2>. DC20-70V Out put; 3>. For LED power : 10-100W 4>. Em ergency time: 3 hrs ( can be custom if possible) 5>. Batter: Dc12V; 6>. Charge current: 100-200m A; 7>. Charge time: 30-45Hrs by slowing charge way; 8>. Max. Size: 440* 75* 75mm. Emergency Driver Connect Drawing & Attention: Seeing the connect drawing and each part will separately connect to the following lines: 1>. "1" connect AC"L". 2>. "2" connect AC"N" and LED driver's AC "-" ends. 3>. From "1" to connect one wire to wall switcher "S", then connect to "3". LED driver's AC "L" also needs to connect to "3". 4>. "4" connect LED driver's DC"+" of DC output end. 5>. "5"connect Lamp's "-" and LED driver's DC"-" here. 6>. "6"connect lamp's " +" here. After all connections are finished, then turn on the power to test.  Do not allow the emergency driver to be no load, no matter to check the lighting function or test the inverter's charging function, it must connect lamp to work. Main driver wire: AC "L" and "N" must connect to the main wire in the emergency box, switcher is not allowed to install on them. When lamp starts emergency lighting, it will be not controlled by Switcher. Green LED: it shows driver working; Red LED, it shows recharging; Yellow LED: it shows malfunction. In the emergency lighting, except LED lamp, all working sign lamps will be turned off. Maintenance: Emergency ma chine chip is the core component for controlling the battery charging and starting the emergency lighting, so when connect the wires and should keep it connected correctly. After installation and work, it will release the power from battery each three mo nths, which can protect the battery and extend its lifetime . After they are used norma lly, they should be often checked and ma intained by professional workers, once they find they work unusually or need to inspect, please inform luxsky lighting. Â
Today let`s talk about touch screen laptop. Sometimes people take Yoga Laptop or 2 In 1 Laptop or 360 Laptop as foldable touch screen laptop. Cause the later ones usually with touch screen function. The difference is that touch screen laptop specials can`t be flipped up to 360 degree, usually 180 degree. Do you think which kind of person love 2 in 1 touch screen laptop more? Business people is the right answer, cause they care more performance, touch screen function, 180 rotating, which are the very important points for businessman, especially teaching in person, do presentation, etc.
Do you think what other business laptop businessman love also except touch screen laptop under 20000? 14 inch 11th Laptop and 15.6inch 11th or 10th Laptop should be the top levels.
As a professional manufacturer, also customizing Android Tablet, Mini PC , and all in one except laptop. So believe you can always get the most competitive one at this store, balancing the quality and cost at top.
Any other special demand, you can just contact us freely. Will try our best to back you up.
Touch Screen Laptop,Touch Screen Laptop Specials,Touch Screen Laptop Under 20000,Foldable Touch Screen Laptop,2 In 1 Touch Screen Laptop Henan Shuyi Electronics Co., Ltd. , https://www.shuyielectronics.com
when meet special situations after whole power is off and offer people's convenience for actitities in daily life,
especially for life escape, which is done according to international enmergency lighting time& quality standards.
lighting projects. Here, you canget our products, technology and good service support.Welcome to enquiry our
LED emergency lighting Panel lights.
Part No.
CCT available
Size(mm)
Power
Emergency Power
Emergency Time
CRI
Function
LS-01-PL3030
2800K-6500K
295x295mm
18W
5W/6W/7W/15W
1-3 hours
>80Ra
Emergency
LS-01-PL5959
2800K-6500K
595x595mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6060
2800K-6500K
600x600mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6262
2800K-6500K
620x620mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL3012
2800K-6500K
295x1195mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6012
2800K-6500K
595x1195mm
48W/60W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-R5
2800K-6500K
Φ180mm
10W
3W/5W/8W
1-3 hours
>80Ra
Emergency
LS-01-R6
2800K-6500K
Φ200mm
12W
3W/5W/8W
1-3 hours
>80Ra
Emergency
LS-01-R8
2800K-6500K
Φ240mm
15W
3W/5W/8W
1-3 hours
>80Ra
Emergency
Features:
Â
Â
Emergency LED Panel Light
when meet special situations after whole power is off and offer people's convenience for actitities in daily life,
especially for life escape, which is done according to international enmergency lighting time& quality standards.
lighting projects. Here, you canget our products, technology and good service support.Welcome to enquiry our
LED emergency lighting Panel lights.
Part No.
CCT available
Size(mm)
Power
Emergency Power
Emergency Time
CRI
Function
LS-01-PL3030
2800K-6500K
295x295mm
18W
5W/6W/7W/15W
1-3 hours
>80Ra
Emergency
LS-01-PL5959
2800K-6500K
595x595mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6060
2800K-6500K
600x600mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6262
2800K-6500K
620x620mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL3012
2800K-6500K
295x1195mm
40W/48W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-PL6012
2800K-6500K
595x1195mm
48W/60W
12W-30W
1-3 hours
>80Ra
Emergency
LS-01-R5
2800K-6500K
Φ180mm
10W
3W/5W/8W
1-3 hours
>80Ra
Emergency
LS-01-R6
2800K-6500K
Φ200mm
12W
3W/5W/8W
1-3 hours
>80Ra
Emergency
LS-01-R8
2800K-6500K
Φ240mm
15W
3W/5W/8W
1-3 hours
>80Ra
Emergency
Features:
Â
Â
Square Round LED Flat Panel Emergency Light
Model NO.: LS-01-PL3030
Battery Type: Ni-Cd Battery
Emitting Color: Changeable
Material: Aluminum
Certification: CE, RoHS, FCC, UL, TUV
Warranty: 3 Years
Lumens: 100lm/W
Trademark: luxsky lighting
Transport Package: Each One Packed in Box, 4PCS Packed in One Carton
Specification: 595x1195mm, 295x1195mm, 620x620mm, 95x595mm, etc
Origin: Shenzhen, China
HS Code: 9405409000
Model NO.: LS-01-PL3030
Battery Type: Ni-Cd Battery
Emitting Color: Changeable
Material: Aluminum
Certification: CE, RoHS, FCC, UL, TUV
Warranty: 3 Years
Lumens: 100lm/W
Trademark: luxsky lighting
Transport Package: Each One Packed in Box, 4PCS Packed in One Carton
Specification: 595x1195mm, 295x1195mm, 620x620mm, 95x595mm, etc
Origin: Shenzhen, China
HS Code: 9405409000
Emergency LED Panel Light